Відео

Any idea what the top bolt towards the front of the PWC is? I cannot get on it with literally anything it looks square but does not fit an 8mm or 7mm wrench.

I've rxp 215, 2006... Fuel sensor doesn't work.. It shows always full.. Fuel pump it's new..

Would you recommend a SBT KIT ?

Is there a reason you put it in the freezer ?

I removed my jet pump, looks like the bearing is bad due to water intrusion and no grease. Is there any clever way to do this without a press? I suppose I could buy a cheap one, but they’re pretty darn big, not sure I want one in my small house, and some rebuild shops only charge about $120ish labor anyway. Thoughts?

So I was cranking my ski and saw a spark from the battery I’m getting nothing from my ski when I put the key in. The battery is at 12.5 volts could this be the post shorted or something?

Genius..next even a more dramatic and highly irritating background music..

Which would u rather have Harley sportster s or indian ftr and do u think the ftr is a good competitor to all the japenese and European naked bikes

I watched your video, as I have also been attempting this. I noticed when you got the alignment right, there was still a tiny bit of touch between the alignment rod and receiver. What is the allowance for that? I have been pulling my hair out trying to get it absolutely perfect. Any advice on a method of how to shim or which mount to adjust? Thanks

lol, I didn’t know that industrial plastics sold elsewhere, thought it was exclusive to Calgary. I just mixed the whole colour bottle to in to can of gel coat, it doesn’t effect shelf life.

Thanks for sharing your installation. It is necessarily always to modify the MoskoMoto frame insert? I have a 900GS but couldn’t find the rack for this MoskoMoto set.

Great video, as always!

U forgot compression in the list an engine needs to run

AWESOME job!!! Wow!!!

How much would you charge to program a learner key for a 2011 gtx 260 limited?

Merci beaucoup ❤❤❤❤❤❤

Merci beaucoup ❤❤❤❤❤❤

Merci beaucoup ❤❤❤❤❤❤❤❤❤❤

I do not recommend installing this type of air breathing catch can. The proper catch can should be a non air breathing or closed catch can and should go back to the fitting you capped off.

Any tricks to get the threaded seal retainer out. I've soaked it with penetrating oil, heat, used a 1/2 to 3/8 adapter on the 4 pin tool with a pry bar,also with an impact gun and it's not budging. This is the first time the SC has been apart and has 105 hrs. The intercooler was leaking so the SC has a little corrosion inside but i caught it early and can't see it making the retainer so hard to remove. I've onlu used a heat gun but it was hot enough for the o rings to start smoking. Maybe more heat? I'm worried i'll snap the housing mounting tabs connected to the maintenance fixture off i'm cranking on it so hard.

Thank you so much!for this amazing video :D

how to set the clock?

which depth finder was this ?

I have a 2020 GTX 300 Limited with the ST-3 hull (acrylic}. I'm finding no real definitive answers about how to repair or successfully work with this material. Someone rammed the nose into a dock. Seadoo doesn't even offer a replacement hull. Some patch using regular fiberglass, but many say it won't hold. Have you had any experience with it?

Not only are your videos super helpful, but you have been responding to almost every comment for the last 6 years. That speaks volumes of your character and commitment to the ski community, Unlike most of the other fruit loops who make vid and move on. I believe I'll subscribe. 👍

Very professional. Thanks for sharing

So it was a gasket on the fuel pump or the filter?

Can vinegar be used on new 2022 Yamaha fx SVHO jertskis?

No issue with any of this, but a bit of a stretch to call it 'improvements' I think.

Hi, I have an 2002 gtx 4-tec SeaDoo bombardier and I put the key in and I get a long beep and the dash comes on but won’t start. Then I unplug then put it back in and it pops a fuse do you think my dess post is bad?

Well done! I'm looking to buy a 2002 GTI. Looks to be in fantastic shape. Anything glaring about this model?

Pretty sure I sucked up some stuff today on my gtr 215. Was running very well hitting top speeds with ease, the first thing I noticed that was odd was the ski doing low speed while I did not have much throttle in. I hit the throttle again and it reset, then it started shuddering a lot, gave it a good shake but there was still something stuck in the impeller, major vibration. Had to take it into the shop regardless for a soft supercharger rebuild before going away. Hopefully everything works.

I have a 2024 900 RP, I can only see 2 screws to remove the front beak, anyone show mw exactly where the 4 to remove the beak are exactly?

Have a 2004 seadoo GTX supercharged. Had a new battery last year, ran great. Put the battery back in this year, ran perfect first use. Went to ride again a few days later and battery was dead. Put a new battery in and it keeps beeping like I have the key on the dess but I do not. Seems to be a short somewhere. Any ideas?

So we haven’t started our skis in a couple of years. Garage kept. What do I do and what do you recommend. Thanks.

Turn off the damn music it's irritating

This is somthing i just experienced. My absorbor cracked at the where the swivle bolts hold in the seat s shock support, not sure of the name of it. Any how i prefer the nut and bolt instead of the rivets. And lowering of the bracket is key. My glove box is always getting stuck.

Je veux d’amande Kit Pastille de Soupape pour jet ski yamaha fzr 2016

Je veux demander Kit Pastille de Soupape pour jet ski yamaha fzr 2016 4:43

Je veux demander Kit Pastille de Soupape pour jet ski yamaha fzr 2016 4:43

Je veux demander Kit Pastille de Soupape pour jet ski yamaha fzr 2016 4:43

Je veux demander Kit Pastille de Soupape pour jet ski yamaha fzr 2016

how do you know when the steering is straight? Is it like a half turn, full turn?

Can we use any type of coolants?

Worthless video. Never once talked about dewinterizing ski. Thanks for wasting my time

Thank you for the video, i have only a question about the expansion tank, when do you drain the coolant fluid also the expansion thank became empty or i need to do something, thank you so much

I have a 2023 Yamaha FX HO Cruiser… can I do something to that to make it faster at all?

Hey! Amazing Videos. I have a question: A friend of mine has a 2016 GTX 300 Limited (Gen 2 IBR I think?!). He wanted to clean the rear pump assembly and lowered the IBR using Override while on the trailer. He forgot to take of the license-plate bar, so when lowering, without noticing, the IBR was pushing down on that solid metal bar for around 5 seconds. After realizing, he checked for damage (nothing visible) and functionality (movement in IBR-Override seems fine/unchanged). Best take it to a dealer to check nothing in the IBR assembly cracked because of this, or will it be safe to assume its fine (does it have a pressure sensor that made it stop or would a fuse blow before any part gets truely damaged? Owners-Manual says the IBR WILL get damaged if blocked in IBR-Override...) Thanks in advance!

Hello, Love your video I just installed a brand new IBR unit on my 2012 GTI SE 130. does it need to be programmed? Do I need to take it to the dealer? Please help thanks

Should I remove the flange nut first and then the impeller? I am not trying to rebuild the pump my bearings are good, just trying to put in a new wear ring.